具體的清洗時間要根據清洗工件結構、材質、油污及清洗方式的不同，所需的清洗時間也會有所差異。一般來說，油污較重零件的清洗時間可適當延長，油污較輕易于清洗的可縮短清洗時間；清洗的同時，還要保證清洗的效率，所以清洗時間是根據清洗實際效果而定，并非一成不變的。相反，如果刻意延長了清洗時間，工件表面長時間摩擦，還可能會導致工件表面損傷。

The specific cleaning time depends on the structure, material, oil stains, and cleaning method of the cleaned workpiece, and the required cleaning time may also vary. Generally speaking, the cleaning time for parts with heavy oil stains can be appropriately extended, while for parts with light oil stains that are easy to clean, the cleaning time can be shortened; While cleaning, it is also necessary to ensure the efficiency of the cleaning, so the cleaning time is determined based on the actual cleaning effect and is not fixed. On the contrary, if the cleaning time is deliberately extended, prolonged friction on the surface of the workpiece may also lead to surface damage.

碳氫清洗機佳清洗溫度？

What is the optimal cleaning temperature for hydrocarbon cleaning machines?

正常情況下，低閃點的碳氫清洗劑是不允許加溫清洗的。高閃點碳氫清洗劑加溫對溫度的控制非常關鍵，如果是初次加溫使用，請務必由專業的技術人員進行指導操作，并做好安全防范工作。

Under normal circumstances, low flash point hydrocarbon cleaning agents are not allowed to be heated for cleaning. The heating of high flash point hydrocarbon cleaning agents is crucial for temperature control. If it is the first time using them for heating, it is necessary to have professional technical personnel guide the operation and take safety precautions.

清洗溫度主要取決于所用碳氫清洗劑的清洗工藝及閃點。隨著加溫溫度的提升，一般情況下碳氫清洗劑的清洗力是有一定程度提升的，但由于碳氫有可燃性，清洗溫度越高碳氫蒸汽揮發越快，所以在加溫的同時需要嚴格把控加溫溫度。

The cleaning temperature mainly depends on the cleaning process and flash point of the hydrocarbon cleaning agent used. As the heating temperature increases, the cleaning power of hydrocarbon cleaning agents generally improves to a certain extent. However, due to the combustibility of hydrocarbons, the higher the cleaning temperature, the faster the evaporation of hydrocarbon vapor. Therefore, strict control of the heating temperature is required while heating.

一般來說，碳氫清洗溫度控制比碳氫閃點低約15℃，這樣安全隱患相對會小一些。因此，需要綜合考慮碳氫清洗工藝及閃點的性質，從而設定產品的清洗溫度。

Generally speaking, the temperature control for hydrocarbon cleaning is about 15 ℃ lower than the flash point of hydrocarbons, which reduces safety hazards relatively. Therefore, it is necessary to comprehensively consider the properties of hydrocarbon cleaning process and flash point, in order to set the cleaning temperature of the product.

碳氫清洗機清洗方式

Cleaning method of hydrocarbon cleaning machine

目前碳氫清洗劑常見的清洗方式主要分為：超聲波清洗、真空超聲波清洗機清洗，具體選擇哪種清洗工藝則要結合需要清洗的工件和原有的清洗工藝來決定。

At present, the common cleaning methods for hydrocarbon cleaning agents are mainly divided into ultrasonic cleaning and vacuum ultrasonic cleaning machine cleaning. The specific choice of cleaning process depends on the workpiece to be cleaned and the existing cleaning process.

不同的清洗方式也有其各自的特點。

Different cleaning methods also have their own characteristics.

超聲波清洗分為普通超聲波清洗與真空超聲波清洗。

Ultrasonic cleaning is divided into ordinary ultrasonic cleaning and vacuum ultrasonic cleaning.

普通超聲波清洗，設備資金投入較少，可手動操作，靈活便捷。但清洗劑損耗與換液頻率相對較高。對有盲孔的產品清洗力較弱。

Ordinary ultrasonic cleaning requires less investment in equipment, can be manually operated, and is flexible and convenient. However, the loss of cleaning agents and the frequency of liquid changes are relatively high. Weak cleaning power for products with blind holes.

真空超聲波清洗，投入的資金相對較大，通常是自動化清洗，使用簡單方便。清洗劑的損耗和換液頻率都較低，對有盲孔的產品清洗效果較好，清洗品質更穩定，安全性也更強。

Vacuum ultrasonic cleaning requires relatively large investment and is usually automated, making it simple and convenient to use. The loss of cleaning agents and the frequency of liquid change are relatively low, which has a better cleaning effect on products with blind holes, a more stable cleaning quality, and stronger safety.

本文由碳氫清洗機提供技術支持，更多的詳細精彩內容請點擊我們的網站 http://www.jianqian365.com.cn/我們將會全心全意為您提供滿意的服務。

This article is supported by hydrocarbon cleaning machines. For more detailed and exciting content, please click on our website http://www.jnthcsb.com We will wholeheartedly provide you with satisfactory service.